Feiss VS16702 User Manual download pdf

IMPORTANT

TURN OFF THE POWER AT THE MAIN FUSE OR

CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION

Carefully unpack and identify all parts before assembly. Bulbs

not included.

1. Install mounting plate:

A. Fasten two long machine screws (supplied) onto the

mounting plate (from the side opposite of green grounding

screw head). NOTE: Install onto holes corresponding with

fixture plate mounting holes.

B. Take supply wires from wall outlet box and carefully pass

them through center hole of mounting plate.

C. Install mounting plate onto the outlet box using two

screws supplied with outlet box.

D. Test install fixture plate to make certain about 1/4” (5mm)

of screws protrude outside of fixture plate. If not then

remove fixture plate and adjust screws length accordingly.

Secure screws length by fastening with two hex nuts. Make

certain not to spin screws during fastening.

2. Install anchor (included):

A. Test install fixture plate onto the two long machine

screws. Then while the fixture plate is leveled horizontally,

use a pencil to mark two holes located on the fixture plate.

B. Remove the fixture plate and set aside.

C. Drill marked spots. If drywall or masonry wall then use

1/4" (7 mm) drill bit; if wood wall then use 1/8" (4 mm) drill

bit.

D. Drywall or masonry wall only: Insert plastic anchor into

pre-drilled holes.

3. Connect electrical wires:

A. Connect white fixture wire(s) to white supply wire from

outlet box with wire connector. Connect black fixture

wire(s) to black supply wire from outlet box with wire

connector.

NOTE: Black outlet box wire may be red, round and smooth

and/or have copper conductor. White outlet box wire may be

square and ridged and/or have a silver conductor.

B. Connect fixture ground wire (without plastic insulation)

to ground wire from outlet box (usually with green

insulation) with wire connector.

Note: If there is no supply ground wire at outlet box then

attach fixture ground wire securely onto green grounding

screw located at mounting plate.

IMPORTANT: Never connect ground wire to black or white

supply wires (from outlet box).

4. Install fixture plate:

A. Install fixture plate onto mounting plate by fastening with

two cap nuts.

B. Secure fixture plate onto pre-drilled holes using sheet

metal screws (included).

5. Install fabric shade inside of fixture frame by fastening with

two cap screws.

6. Install bulb (not included). See relamping label located at

socket area for type and maximum allowed wattage.

Assembly Instructions For

VS16702

(E) 12/09

Assembly Instructions For 1

Summary of Contents

Page 1 - Assembly Instructions For

IMPORTANTTURN OFF THE POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOXBEFORE STARTING INSTALLATION Carefully unpack and identify all parts before assemb

Comments to this Manuals

No comments

Feiss VS16702 User Manual

Browse online or download User Manual for Lighting Feiss VS16702. Feiss VS16702 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Feiss VS16702