Feiss MFMISCA0002 User Manual download pdf

Installation Instructions for

Colin 1 Light Wall (Fluorescent)

1.0

MFMISCA0002

Temporarily install the mounting plate to the electrical box using the mounting plate screws and mark the anchor locations

on the wall. Remove the mounting plate.

Drill the appropriate size holes for the anchors and push the anchors into the wall.

Connect the fixture to a suitable ground in accordance to local electrical codes.

Connect the white ballast wire to the neutral power line wire with a wire nut.

Connect the black ballast wire to the hot power line wire with a wire nut.

Neatly place the ballast and wires into the electrical box, then reinstall the mounting plate to the electrical box and screw

the anchor screws into the anchors.

Mount the fixture base onto the mounting plate and secure it with the fixture screws using the Allen wrench.

Install the lamp by pushing the lamp pins completely into the socket holes. Refer to the label on the lamp socket for Max

Wattage information.

Install the shade by slipping it through both fixture rings and onto the bracket.

FIXTURE

ELECTRICAL BOX

MOUNTING

PLATE

FIXTURE SCREW

Wall

GP I :ENERAL RODUCT NFORMATION

This product is listed by one of the following

“ ationally ecognized esting aboratory”NR TL

This product is suitable for damp locations.

This instruction shows a typical installation.

CAUTION - RISK OF FIRE

This product must be installed in accordance with

the applicable installation code by a person familiar

with the construction and operation of the product

and the hazards involved.

Use minimum 90°c supply conductors.

MOUNTING

PLATE SCREW

BALLAST

ANCHOR

SCREW

ANCHOR

SHADE

LAMP

FIXTURE

RING

SOCKET

ALLEN WRENCH

BRACKET

1 2 3 4

Summary of Contents

Page 1 - MFMISCA0002

1Installation Instructions forColin 1 Light Wall (Fluorescent)1.0MFMISCA0002MFMISCA0002Temporarily install the mounting plate to the electrical box us

Page 2

2Installer temporairement la plaque de montage à la boîte électrique à l'aide des vis de la plaque de montage et marquer lesemplacements d'a

Page 3

3Instale temporalmente la placa de montaje a la caja eléctrica con los tornillos de la placa de montaje y marque los lugaresde anclaje en la pared. Re

Page 4 - SAVETHESE INSTRUCTIONS!

Comments to this Manuals

No comments

Feiss MFMISCA0002 User Manual

Browse online or download User Manual for Lighting Feiss MFMISCA0002. Feiss MFMISCA0002 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Feiss MFMISCA0002