Feiss WB1323 User Manual download pdf

(E) 4/07

ASSEMBLY INSTRUCTIONS FOR VS12102, VS12103, WB1323

IMPORTANT:

TURN OFF POWER AT MAIN FUSE OR

CIRCUIT BREAKER BOX BEFORE

STARTING INSTALLATION

Carefully unpack and identify all parts

before assembly. Bulb not included.

1. Install mounting plate (see fig. 1):

A. Take supply wires from outlet box and

carefully pass them through center hole of

mounting plate. Note: the flat surface of

mounting plate must face the outlet box and the

angled rim side facing toward you.

B. Install mounting plate onto the outlet box

using two screws supplied with outlet box.

C. Spread electrical wires so that black wires

are on one side of the outlet box and the white

wires are on the other side.

2. Connect electrical wires (see fig. 1):

A. Connect fixture wires (with plastic insula-

tion):

Connect fixture wire without tracer (round and

smooth) to black (or red) supply wire. Con-

nect fixture wire with tracer (square and ridged)

to white supply wire. Wrap with electrical tape

to secure wire connector and wires together.

B. Connect ground wire:

Connect fixture ground wire to supply ground

wire (usually with green insulation) with wire

connector. Note: If there is no supply ground

wire at outlet box then attach fixture ground

wire securely onto green grounding screw

located at mounting plate. See fig. 2.

IMPORTANT: Never connect ground wire to

black or white supply wires.

3. Install fixture plate (see fig. 1):

While carefully tucking all electrical wires

inside of fixture plate, install the fixture plate

onto the mounting plate by fastening with a

head less screw. Use provided hex key to

tighten.

4. Install glass shade onto fitter and lock into

position by installing the spacer tube and

counter ring back onto the socket. Use

supplied wrench to tighten. Do not over

tighten.

5. Install light bulb (not included). See relamping

label at socket area for type and maximum

allowed wattage.

6. Install ring by placing on end of glass shade. If

preferred, you have the option of not installing

the rings.

Bulb

(not included)

Wrench

Counter

Ring

Spacer Tube

FIG. 1

FIG. 2

Shade

Fixture Plate

Fixture Wire

Fixture Ground Wire

Supply

Ground Wire

Supply

Wire

Fixture

Plate

Hex Key

Socket

Ring

Head less Screw

Mounting Plate

Outlet Box

(E) 4/07 1

Summary of Contents

Page 1 - (E) 4/07

(E) 4/07ASSEMBLY INSTRUCTIONS FOR VS12102, VS12103, WB1323IMPORTANT: TURN OFF POWER AT MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE STARTING INSTALLATION

Related models: VS12103 | VS12102 |

Comments to this Manuals

No comments

Feiss WB1323 User Manual

Browse online or download User Manual for Lighting Feiss WB1323. Feiss WB1323 User Manual

Summary of Contents

Related models: VS12103 | VS12102 |

Comments to this Manuals

Related products and manuals for Lighting Feiss WB1323