Feiss P1146 User Manual download pdf

(E) 4/08

IMPORTANT

TURN OFF THE POWER AT THE MAIN FUSE OR CIRCUIT BREAKER

BOX BEFORE STARTING INSTALLATION

Carefully unpack and identify all parts before assembly. Bulb not included.

1. A. Insert glass tube inside of fixture. Then install glass shade onto bottom of fixture

by holding with cover and fastening with short screws. Note: Make certain wire

connector protrude outside of cover before fastening screws.

B. Install socket assembly onto threaded pipe which protrude below the cover by

fastening with a lock washer and hex nut.

C. Join the two wire connectors together. See fig. 1. Make certain they are securely

connected.

D. Install bulb (not included). See relamping label located near socket area for type

and maximum allowed wattage.

E. Place upper ring onto bottom section of shade. See diagram for correct position.

F. Place glass plate inside of lower ring.

G. Lock upper ring onto lower ring by fastening with cap nut (decorative), from

below.

2. Install stems:

A. Choose desired installation height from dimensions shown in above diagram.

Thread fixture wires through each stems to be used. Note correct position of stems

from left diagram. Screw all stem together until secure.

B. Install bottom end of stem assembly by screwing into top of fixture.

C. Thread fixture wires through canopy and then swivel. Allow canopy to carefully

slide down without scraping the surface of stems. Then install swivel by screwing

onto top end of stem assembly.

3. Follow enclosed supplement installation instructions for electrical and fixture

installation onto house outlet box. If you do not have an outlet box at desired

location to attach the fixture than hire a qualified electrician to create one.

Assembly Instructions For

P1146

Cap Nut

Swivel

Canopy

(fixture plate)

Stem

Fig. 1

Lower Ring

Cap Nut

(Decorative)

Shade

Cover

Socket

Assembly

Glass

Tube

Upper

Ring

Bulb

(not included)

Fixture

Glass Plate

41-1/2"

29-1/2"

47-1/2"

23-1/2"

59-1/2"

35-1/2"

53-1/2"

17-1/2"

Assembly Instructions For 1

Summary of Contents

Page 1 - Assembly Instructions For

(E) 4/08IMPORTANTTURN OFF THE POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE STARTING INSTALLATION Carefully unpack and identify all parts be

Comments to this Manuals

No comments

Feiss P1146 User Manual

Browse online or download User Manual for Lighting Feiss P1146. Feiss P1146 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Feiss P1146