Feiss OL5413 User Manual download pdf

(E) 4/07

ASSEMBLY INSTRUCTIONS FOR OL5413

Bulb

(not included)

Glass Plate

IMPORTANT

TURN OFF THE POWER AT THE MAIN FUSE

OR CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION

Lock Washer

Rubber Washer

Coupler

Finial

Carefully unpack and identify all parts before

assembly. Bulb is not included.

1. If you are replacing an existing fixture, disconnect

and remove the old fixture. Expose the supply

wiring from the outlet box.

2. Screw the small threaded pipe 3 complete turnsinto

the flat side of mounting strap and lock inplace

with hex nut.

3. Fasten the mounting strap to the outlet box using

the two screws supplied with the outlet box.

4. Spread the electrical wires so that the black wires

are on one side of the outlet box and the whitewires

are on the other side.

5. Grounding Connection:

  This fixture is provided with a ground wire.

Connectfixture ground wire to ground wire from

outletbox with wire connector (not provided).



  Never connect ground wire to black or white supply

wires.

6. To make electrical connections:

 Connect the white wire(s) from the fixture to the

white wire of the outlet box. Connect the black

wire(s) from the fixture to the black wire of the

outlet box. NOTE: Black outlet box wire may be

red, round & smooth and/or have copper conductor.

White outlet box wire may be square & ridgedand/

or have a silver conductor.

7. Place fixture through short threaded pipe so that

fixture sits flushagainst ceiling. Be sure all wires

are inside fixture. Secure fixture to ceiling by

screwing coupler onto small threadedpipe. Coupler

must turn at least 3 times, if it does not youmust

lengthen threaded pipe accordingly.

8. Install bulbs (not included). See relamping label

located atsocket area for type and maximum

allowed wattage.

9. Install a hex nut onto one end ofthreaded pipe

leaving about 1/2"(13mm) thread exposed. Screw

same end of threaded pipe intocoupler. Tighten hex

nut.

10.Carefully slip glass platethrough same pipe until it

tucks into bottom of fixture.Then slip rubber

washer and secure all together byfastening with

finial. IMPORTANT: Do not over tightenfinial.

Supply

Ground Wire

Mounting Strap

Short Threaded Pipe

Long Threaded Pipe

Outlet Box

Mounting Screws

(not supplied)

Fixture

Ground Wire

Fixture

Wire

Fixture

Supply Wire

Outlet Box Ceiling

(E) 4/07 1

Summary of Contents

Page 1 - (E) 4/07

(E) 4/07ASSEMBLY INSTRUCTIONS FOR OL5413 Bulb(not included)Glass PlateIMPORTANTTURN OFF THE POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOXBEFORE STA

Comments to this Manuals

No comments

Feiss OL5413 User Manual

Browse online or download User Manual for Lighting Feiss OL5413. Feiss OL5413 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Feiss OL5413