Feiss F2324-3 User Manual download pdf

(E) 10/07

IMPORTANT

TURN OFF THE POWER AT THE MAIN FUSE OR

CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION

Carefully unpack and identify all parts before assembly. Bulb

not included.

1. This fixture can be mounted onto ceiling either as chain hung

or flush mount:

CHAIN HUNG INSTALLATION- Fig. 1:

A. If Fixture loop is separated from top assembly:

Thread fixture wire and ground wire through fixture loop.

Then install fixture loop by screwing into top threaded pipe.

B. At this point, determine the desired length of chain to

hang. Remove any unwanted links with chain pliers

C. This feature is supplied with 2 threaded chain links. These

links are opened and closed by twisting cylinder on chain link.

One threaded chain link should be installed onto fixture loop

and the other should be installed onto canopy loop. The

standard chain should be installed in between these 2

threaded chain links.

D. Take ground wire and weave thru above chain links, then

thread thru center hole in canopy loop. Repeat with fixture

wire (wire with plastic insulation).

FLUSH INSTALLATION- Fig. 2:

A. Remove and discard fixture loop.

B. Remove and discard canopy loop and threaded pipe from

canopy.

C. Thread fixture ground wire and fixture wire thru

canopy,flat washer, lock washer, and hex nut. Lock all together

on top of fixture by tightening hex nut onto top threaded

pipe.

2. Cut excess wires leaving only 6" (15 cm) length of wires

above canopy. Split fixture wire into two strands. Then strip

off 3/4"(19mm) of outer plastic insulation.

3. Follow enclosed supplement installation instructions for

electrical and fixture installation onto house outlet box. If

you do not have an outlet box at desired location to attach

the fixture than hire a qualified electrician to create one.

4. Slip candle tube over sockets.

5. Install bulbs (not included). See relamping label located at

socket area for type and maximum allowed wattage.

Bulb

(not included)

Assembly Instructions For

Socket

Hex Nut,

Lock Washer

Candle

Tube

Fixture Loop

Fixture

Wires

Canopy (Fixture Plate)

Fixture

Wires

Chain

Adjustable

Link

Ball Cap Nut

Canopy

(Fixture Plate)

F2324/3

FLUSH MOUNT

INSTALLATION

CHAIN HUNG

INSTALLATION

Fig. 1

Fig. 2

Canopy Loop

Canopy

Loop

Canopy

Threaded

Pipe

Assembly Instructions For 1

Summary of Contents

Page 1 - Assembly Instructions For

(E) 10/07IMPORTANTTURN OFF THE POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOXBEFORE STARTING INSTALLATION Carefully unpack and identify all parts be

Comments to this Manuals

No comments

Feiss F2324-3 User Manual

Browse online or download User Manual for Lighting Feiss F2324-3. Feiss F2324-3 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Feiss F2324-3