Feiss FM273 User Manual download pdf

IMPORTANT

TURN OFF THE POWER AT THE MAIN FUSE OR

CIRCUIT BREAKER BOX BEFORE STARTING

INSTALLATION

Carefully unpack and identify all parts before assembly.

Bulb not included.

1. Mounting Plate installation:

A. Install long screws onto mounting plate by screwing from

opposite side of green grounding screw head. Make certain

the two screws are installed at same distance as holes in

crown.

B. Leave about 3/4" (19 mm) of thread exposed then lock in

place by fastening with hex nuts from opposite side.

C. Pass electrical wires from outlet box through center hole

in mounting plate.

D. Fasten the mounting plate onto outlet box using two

screws supplied with the outlet box.

E. At this point, test install crown onto ceiling and make

certain about 3/16" (5 mm) of screw threads are protruding

below crown surface. If not, then adjust screw location by

loosening hex nuts and screwing up or down accordingly.

F. Once correct screw location has been adjusted, remove

crown and tighten hex nuts. Make certain not to spin screws

during tightening.

G. Spread the electrical wires so that the black wires are on

one side of the outlet box and the white wires are on the

other side.

2. Grounding Connection:

This fixture is provided with a ground wire. Connect fixture

ground wire to ground wire from outlet box with wire

connector (not provided).

Never connect ground wire to black or white power

supply wires.

3. Electrical connections:

Connect the white wire(s) from the fixture to the white wire

of the outlet box. Connect the black wire(s) from the fixture

to the black wire of the outlet box. NOTE: Black outlet box

wire may be red, round & smooth and/or have copper

conductor. White outlet box wire may be square & ridged

and/ or have a silver conductor.

4. While gently tucking all wires inside, install crown onto the

outlet box by fastening with cap nuts onto protruding screws.

5. Install bulb (not included). See relamping label located at

socket area for type and maximum allowed wattage.

6. Install shade onto crown by turning in clockwise direction.

IMPORTANT: MAKE CERTAIN SHADE IS FIRMLY LOCKED

INTO CROWN.

Assembly Instructions For

FM271, FM272, FM273

Fixture Wire

Crown

Outlet Box

Supply Wire

Supply

Ground Wire

Mounting Plate

Socket

Outlet Box

Mounting Screw

Long Screw

Fixture

Ground Wire

Shade

Bulb (not included)

Cap Nut

(E) 10/07

FM271, FM272, FM273 1

Summary of Contents

Page 1 - FM271, FM272, FM273

IMPORTANTTURN OFF THE POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE STARTING INSTALLATION Carefully unpack and identify all parts before assem

Related models: FM272 | FM271 |

Comments to this Manuals

No comments

Feiss FM273 User Manual

Browse online or download User Manual for Lighting Feiss FM273. Feiss FM273 User Manual

Summary of Contents

Related models: FM272 | FM271 |

Comments to this Manuals

Related products and manuals for Lighting Feiss FM273