Feiss F2954-6 User Manual

Browse online or download User Manual for Lighting Feiss F2954-6. Feiss F2954-6 User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
1
Installation Instructions for
GP I :ENERAL RODUCT NFORMATION
This product is listed by one of the following
ationally ecognized esting aboratory”NR TL
This product is suitable for dry locations only.
This instruction shows a typical installation.
Determine the height of the fixture with the provided stems and connectors, then assemble them by screwing them
together.
Secure the mounting plate to the electrical box with two mounting plate screws.
Feed the fixture wires through the stems and screw the stem assembly to the pendant.
Feed the fixture wires through the canopy and screw the canopy onto the stem assembly.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the red and blue driver wires to the appropriate fixture wires with wire nuts.
Connect the white driver wire to the neutral power line wire with a wire nut.
Connect the black driver wire to the hot power line wire with a wire nut.
Neatly place the driver and wires into the electrical box and/or canopy, then place the canopy onto the mounting plate and
secure it in place by screwing in the fixture screws.
1
2
1A
PENDANT
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
FIXTURE
SCREW
3
4
5
3
MOUNTING
PLATE
CANOPY
STEM
6
7
8
1
4
CONNECTOR
9
1
1
Audrie 6 Light Chandelier (LED)
1.0
F2954-6
Chandelier
F2954/6_
9 9
DRIVER
CANOPY
6
6
7
8
Page view 0
1 2 3 4

Summary of Contents

Page 1 - F2954/6_

1Installation Instructions forGP I :ENERAL RODUCT NFORMATIONThis product is listed by one of the following“ ationally ecognized esting aboratory”NR TL

Page 2

2Déterminer la hauteur du luminaire avec les connecteurs et les tiges fournies, puis les assembler en les vissant ensemble.Fixer la plaque de montage

Page 3

3Determinar la altura de la lámpara con los tallos proporcionados y conectores, luego ensamblarlos atornillándolos juntos.Fije la placa de montaje a l

Page 4 - SAVETHESE INSTRUCTIONS!

4555 Theodore Fremd Ave Suite B101 Rye, NY 10580800.969.3347www.Feiss.com© 2014 Feiss.All rights reserved.The "Feiss" graphic is aregistered

Comments to this Manuals

No comments